Quick start
1. Assemble the nozzle, the tube and hose.
2. Pull out the mains cable to its full length and plug into the mains supply.
3. Switch on by pressing the On/off switch-button
1
.
Accessories
Insert the hose
Fit the hose
6
to the cleaner by inserting the hose end into the Hose-connector
4
until it
clicks to the position.
TO
remove the hose
When removing, squeeze the clips both side and pull.
Fitting the tubes and accessories
1. Attach the tube to the handle end of the hose.
The hose handle features an air regulation button
7
which allows suction to be
reduced as required.
2. Attach the floor brush
9
to the tube.
3. Attach the multipurpose nozzle
12
to the tube.
Turn the rotating nozzle as the arrowhead show; it can be used as the upholstery nozzle
(for curtains and upholstery).
Turn the rotating nozzle backwards to the home position; it can be used as the crevice
nozzle (for awkward places, behind radiator; or for hard surfaces, pelmets, delicate
objects etc).
Controls
Power
The on/off control is operated by On/off switch-button.
1
Variable power
Variant Speed Knob
2
varies the suction power as required .For example, maximum
suction can be used for cleaning carpets, hard floors etc, and reduced suction for cleaning
upholstery and curtains.
Suction can also be controlled using the airflow regulator
6
on the handle .Closed for
maximum suction, open for reduced suction.
Automatic cable rewind
After use, unplug and press the Cord Rewind Button
3
to retract the cable.
WARNING
: When using the cable rewind, always hold the plug as the cable will rewind
quickly.
