Mercury SST 120/S2000, Руководство пользователя, Страница: 1 / 62

EPA Emissions Regulations
Outboards manufactured by Mercury Marine in the United
States are certified to the United States Environmental Protec-
tion Agency as conforming to the requirements of the regula-
tions for the control of air pollution from new outboard motors.
This certification is contingent on certain adjustments being
set to factory standards. For this reason, the factory procedure
for servicing the product must be strictly followed and, wherev-
er practicable, returned to the original intent of the design.
Maintenance, replacement, or repair of the emission con-
trol devices and systems may be performed by any marine
engine repair establishment or individual.
Engines are labeled with an Emission Control Information de-
cal as permanent evidence of EPA certification.
WARNING
The engine exhaust from this product contains chemi-
cals known to the state of California to cause cancer,
birth defects or other reproductive harm.
The description and specifications contained herein were in ef-
fect at the time this manual was approved for printing. Mercury
Racing, whose policy is one of continued improvement, re-
serves the right to discontinue models at any time, to change
specifications, designs, methods, or procedures without notice
and without incurring obligation.
Mercury Marine, Fond du Lac, Wisconsin U.S.A. Litho in
U.S.A.

2000, Mercury Marine
The following are registered trademarks of Brunswick
Corporation: AutoBlend, Force, Jet-Prop, Mariner, Merc,
MerCathode, MerCruiser, Mercury, Mercury Marine, Mercury
Racing, Quicksilver, Mercury Precision Parts, RideGuide and
Thruster
90-848719000 100
SST 120 S2000
2000 Mercury Marine
