Mercury SmartCraft SC5000 Скачать руководство пользователя страница 20

Страница: 20 / 64

PROPULSION

Page 3-6

90-892133 JULY 2003

Propulsion Data Screens

Troll Control

NOTE: Depending on your engine type, Troll Control feature may not be available.

SINGLE ENGINE

TWIN ENGINE

BASIC OPERATION

IMPORTANT: User must maintain constant helm control while using troll control to
avoid obstacles.

With troll control, you can maintain a trolling speed within a range specific to engine type
without using the throttle. See

NOTE: following.

You must stay in the troll control screen while using troll control. If you leave the troll control
screen, troll will automatically disengage.

You can shut off troll control anytime by pushing SELECT, moving the throttle, or shifting
engine into neutral.

NOTE: Avoid using a very low rpm trolling speed for an extended period of time. Doing so could
result in a low-battery voltage condition.

SETTING TROLL CONTROL

1. Press

to display the TROLL CONTROL display screen.

2. With the engine running, shift engine into gear.

3. Set engine speed at idle.

4. Single Engine – Press SELECT to engage (turn on) the troll control.

Twin Engine – Press SELECT to choose which engine(s) are to be in troll control.
Press

to select STBD, PORT, or BOTH

. Flashing “Setpoint” indicates chosen en-

gine(s). Press SELECT a second time to engage troll control.

5. Press

to set desired RPM.

NOTE: On dual station installations (2 System Views), you can hand-off the current troll con-
trol configuration from the troll control screen from one unit to the other by pressing SELECT
to engage on the opposite unit.

TURNING OFF TROLL CONTROL

There are three ways to turn off the troll control:

•

Press SELECT

•

Move the throttle to a different speed

•

Shift engine into neutral

Содержание SmartCraft SC5000

































































Результаты поиска

Содержание SmartCraft SC5000

Отзывы:

Бренды по названию

Популярные бренды

Mercury SmartCraft SC5000, Руководство по эксплуатации

Результаты поиска

Содержание SmartCraft SC5000

Отзывы:

Бренды по названию

Популярные бренды