background image

26

Motherboard User’s Guide

System Date & System Time

These items set up system date and time.

Primary IDE Master/Primary IDE Slave/Secondary IDE Master/Secondary
IDE Slave/S-ATA0/1

Your computer has one IDE channel and each channel can be installed with one
or two devices (Master and Slave). In addition, this motherboard supports four
SATA channels and each channel allows one SATA device to be installed. Use
these items to configure each device on the IDE channel.

Floppy A/B

These items set up size and capacity of the floppy diskette drive installed in the
system.

You can use cursor arrow keys to highlight anyone of options on the main menu
page. Press 

Enter

 to select the highlighted option. Press the 

Escape

 key to leave

the setup utility. Press +/-/ to modify the selected field’s values.

Some options on the main menu page lead to tables of items with installed values
that you can use cursor arrow keys to highlight one item, and press 

+

++

++

 and 

-----

 keys

to cycle through alternative values of that item. The other options on the main
menu page lead to dialog boxes requiring your answer OK or Cancel by selecting

[OK]

 or 

[Cancel]

.

If you have already changed the setup utility, press 

F10

 to save those changes

and exit the utility. Press 

F1

 to display a screen describing all key functions.

Press 

F9

 to install the setup utility with a set of default values.

Standard CMOS Setup Page

This page displays a table of items defining basic information about your
system.

CMOS SETUP UTILITY – Copyright (C) 1985-2004, American Megatrends, Inc.

Standard CMOS Setup

System Time

00:01:25

System Date

Thu 05/06/2004

Primary IDE Master

Not Detected

Primary IDE Slave

Not Detected

Secondary IDE Master

Not Detected

Secondary IDE Slave

Not Detected

S-ATA0 Master

Not  Decteted

S-ATA1 Slave

Not  Detected

                                                                                                                                                                                                                                                                

Floppy A

1.44 MB 3 1/2”

Floppy B

Disabled

Help Item

User [Enter], [TAB] or [SHIFT-TAB] to
select a field.
Use [+] or [-] to configure system
time.

                     : Move    Enter: Select   +/-/: Value   F10: Save   Esc: Exit
                F1: General Help                              F9: Optimized Defaults

Содержание PI865GVM7 Series











































Отзывы: