Mercury PI845GLM-AGP, Руководство пользователя

Страница: 24 / 52

20
Motherboard User’s Guide
Follow the steps below to install a CNR/PCI expansion card.
1. Locate the CNR or PCI slots on the motherboard.
2. Remove the slot cover for this slot from the system chassis.
3. Insert the expansion card edge connector into the slot and
press it firmly down into it so that it is fully inserted.
4. Secure the expansion card bracket to the system chassis with
a screw.
AGP Ultra Slot (AGP1)
The AGP Ultra slot is used to install AGP graphics card that
emulates the AGP function. In order to get better performance
and compatibility on our special design AGP Ultra slot, we
recommend users use one of the AGP graphics cards that have
been tested by our company. Please refer to page 21 for the
“VGA Card Support List for AGP Ultra Slot”.
Note: If the AGP card is already installed, the computer won’t
auto setup the onbaord VGA driver.
Expansion Slots
This motherboard has one AGP Ultra, one CNR and three 32-bit
PCI slots.
CNR1
PCI1
PCI2
PCI3
AGP1