Mercury MerCruiser Diesel Inboard 2.8L Скачать руководство пользователя страница 16

Страница: 16 / 93

Section 1 - Getting to Know Your Power Package

Page 8

90-8M0133679

eng

JUNE 2017

Remote Controls

Your boat may be equipped with Mercury Precision Parts or Quicksilver remote controls. All controls may not have all features

shown. Consult your dealer for a description and/or demonstration of your remote control.

Panel Mount Features

a -

Neutral lock button

b -

Throttle‑only button

c -

Lanyard stop switch

d -

Control handle tension adjustment screw

e -

Control handle

f -

Trim and tilt button

Neutral lock button

. Prevents accidental shift and throttle engagement. The neutral lock button must be pushed into move the

control handle out of neutral.

Throttle

‑

only button

. Allows engine throttle advancement without shifting the engine. This is done by disengaging the shift

mechanism from the control handle. The throttle‑only button can be depressed only when the remote control handle is in the

neutral position, and should only be used to assist in starting the engine.

Lanyard stop switch

. Turns the ignition off whenever the operator (when attached to the lanyard) moves far enough away

from the operator's position to activate the switch. See

Lanyard Stop Switch

for information on the use of this switch.

Control handle

. The shift and throttle are controlled by the movement of the control handle. Push the control handle forward

from neutral with a quick, firm motion to the first detent for forward gear. Continue pushing forward to increase speed. Pull the

control handle back from neutral with a quick, firm motion to the first detent for reverse gear and continue pushing back to

increase speed.

Control handle tension adjustment screw (not visible)

. This screw is used to adjust the effort required to move the remote

control handle. Refer to the instructions provided with the remote control for complete adjustment instructions.

Trim (tilt) button

. See

Power Trim

Console Mount Features

a -

Throttle‑only button

b -

Control handle

c -

Power trim switch

d -

Trailer switch

mc77019-1

mc79503-1

Содержание MerCruiser Diesel Inboard 2.8L






























































































Результаты поиска

Содержание MerCruiser Diesel Inboard 2.8L

Отзывы:

Mercury MerCruiser Diesel Inboard 2.8L, Руководство по эксплуатации и техническому обслуживанию, Страница: 16 / 93

Результаты поиска

Содержание MerCruiser Diesel Inboard 2.8L

Отзывы: