Mercury MerCruiser 5.7 Horizon, Руководство пользователя

Страница: 73 / 114

Section 5 - Maintenance
90-899883173 DECEMBER 2007 Page 65
1. Remove oil fill cap.
33140
Oil fill cap
IMPORTANT: Add the specified engine oil to bring the level up to, but not over, the full or
OK range mark on the dipstick.
2. Add the specified engine oil to bring the level up to, but not over, the full or OK range
mark on the dipstick. Recheck oil level.
3. Replace the fill cap.
All Models Capacity Fluid Type
Engine oil (with filter)
4.25 L
(4.5 US qt)
Mercury Full‑Synthetic MerCruiser Engine Oil 20W‑40
Changing Oil and Filter
See
Maintenance Schedule
for the change interval. Engine oil should be changed before
placing the boat in storage.
IMPORTANT: Change engine oil when the engine is warm from operation. Warm oil flows
more freely, carrying away more impurities. Use only recommended engine oil (refer to the
Specifications section).
Easy Engine Oil Drain System
NOTE: The boat must be out of water to perform this procedure.
1. Loosen the oil filter to vent the system.
2. Allow sufficient time for the oil to drain from the filter down into the engine block.
3. Remove the bilge drain plug.