Mercury M48 GT, Руководство пользователя

Страница: 10 / 22

Wheeltech M48 GT electric scooter Part Code: Z40962-00
Owner’s Handbook Page 9 of 9
4. OPERATION
4.1 CONTROL PANEL
1. Wigwag paddle
2. Head light switch
3. 4mph / 8mph switch
4. Battery gauge
5. Speed dial
6. Indicator switch
7. Hazard light switch
8. Horn
3 4 5 6 7 2 1 8
4.2 HOW TO OPERATE YOUR SCOOTER
•
Ignition Switch
•
The ignition switch is operated by the key supplied, and is located on the right hand side of the
tiller below the front indicator lamp.
•
To switch the scooter on, insert the key and turn 90° clockwise
•
To switch the scooter off, turn the key 90° anticlockwise and remove (note that the key cannot be
removed whilst the scooter is switched on.
•
Forward, Reverse and Braking
•
Push the wigwag paddle forwards with your right thumb and the vehicle will move forward.
•
Push the wigwag paddle forwards with your left thumb and the vehicle will move backward.
•
The horn will sound when the vehicle is reversing.
•
Release the wigwag paddle freely while moving, and the electromagnetic brake in the motor will
be activated. The rear brake lights will also illuminate when the electromagnetic brake is operating.
•
The controls can be reversed for left-handed people or those who do not have full use of their right
arm. Please enquire with your dealer about this setting.
•
Manual Brake
As well as an electromagnetic brake, the M48 GT has a manual cable brake. Squeeze the brake le ver
to apply the brake then release the lever to release the brake.
•
Speed Dial
•
The position of this dial determines the maximum attainable speed of the scooter.
•
Turn the dial clockwise to increase the maximum speed, or turn the dial anticlockwise to reduce
the maximum speed attainable.