Mainboard User’s Manual
Optional Extension Brackets
For this mainboard, you can also obtain a USB module extension
bracket for more USB ports. Install them by following the steps
below.
Note:
All the ribbon cables used on the extension brackets have a
red stripe on the Pin-1 side of the cable.
Extended USB Module
This module bracket has four USB 2.0 ports for more USB devices
(USB 2.0 port USB2, USB3).
1
USB2
Pin Signal
Pin Signal
1 VERG_FP_USBPWR0
2 VERG_FP_USBPWR0
3 USB_FP_P0-
4 USB_FP_P1-
5 US
6 US
7 GROUND
8 GROUND
9 KEY
10 NC
1. Locate the USB2/USB3 header on the mainboard.
2. Plug the bracket cable onto the USB2/USB3 header.
3. In the system chassis, remove a slot cover from one of the
expansion slots and install the extension bracket in the
opening. Secure the extension bracket to the chassis with a
screw.
USB3
1
16
Содержание KOB 845G NDSMx
Страница 4: ...Mainboard User s Manual IV...
