Mercury Heavy Duty 380 Скачать руководство пользователя

Страница: 50 / 50

OWNERS SERVICE ASSISTANCE

Service Assistance

Your satisfaction with your inflatable product is very important to

your dealer and to us. If you ever have a problem, question or

concern about your inflatable boat or outboard motor, contact your

dealer or any authorized Mercury Marine dealership. If additional

assistance is required, take these steps.

1. Talk with the dealership's sales manager or service manager.

If this has already been done, then contact the owner of the

dealership.

2. Should you have a question, concern, or problem that cannot

be resolved by your dealership, please contact Mercury

Marine Service Office for assistance. Mercury Marine will work

with you and your dealership to resolve all problems.

The following information will be needed by the service office:

• Your name and address
• Daytime telephone number
• Model and serial number of your outboard
• Model and serial number of your inflatable boat
• The name and address of your dealership
• Nature of problem

Parts And Accessories Inquiries

All inquiries concerning genuine replacement parts and

accessories should be directed to your local authorized dealer. The

dealer has the necessary information to order parts and

accessories for you. When inquiring on parts and accessories, the

dealer requires the model and serial number to order the correct

parts.

Service Away From Home

If you are away from your local dealer and the need arises for

service, contact the nearest authorized dealer. Refer to the Yellow

Pages of the telephone directory. If, for any reason, you cannot

obtain service, contact the nearest Mercury Marine Service Office.

Содержание Heavy Duty 380



















































Результаты поиска

Содержание Heavy Duty 380

Отзывы:

Похожие инструкции для Heavy Duty 380

Бренды по названию

Популярные бренды

Mercury Heavy Duty 380, Руководство пользователя

Результаты поиска

Содержание Heavy Duty 380

Отзывы:

Похожие инструкции для Heavy Duty 380

Бренды по названию

Популярные бренды