Mercury Grand Marquis 1998, Руководство пользователя

Страница: 56 / 153

If the programming procedure was successful, the new SecuriLock
y
key(s) will start the vehicle’s engine. The theft indicator (located on the
instrument panel) will light for three seconds and then go out.
If the programming procedure was not successful, the new SecuriLock
y
key(s) will not operate the vehicle’s engine. The theft indicator will flash
on and off. Wait at least one minute and then repeat the procedure from
step 1. If failure repeats, bring your vehicle to your dealership to have
the spare SecuriLock
y
key(s) programmed.
KEYLESS ENTRY SYSTEM
With the keyless entry keypad, you
can:
•
lock or unlock the vehicle doors
without using the key.
•
disable/enable horn chirp.
•
disable/enable autolock
See also
Remote entry system
in this chapter for more information.
Your vehicle has a factory-set 5 digit code that operates the keyless entry
system. You can also program your own 5 digit personal entry code.
The factory-set code is located:
•
on the owner’s wallet card in the glove compartment
•
taped to the computer module
When pressing the controls on the keyless entry keypad, press the
middle of the controls to ensure a good activation.
Programming your own entry code
1. Enter the factory-set code (keypad will illuminate when pressed).
2. Press the 1/2 control within five
seconds of step 1.
3. Enter your personal 5 digit code.
Enter each digit within five seconds
of the previous one.
All of the vehicle doors will lock and unlock to confirm programming of
the new code.
Do not set a code that includes five of the same number or presents them
in sequential order. Thieves can easily figure out these types of codes.
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8
9 0
Controls and features
55