Mercury Floor Machines, Inc.
New Equipment Warranty
Limited Warranty
Mercury Floor Machines, Inc. warrants new equipment against defects in material and
workmanship under normal use and service to the original purchaser. Any statutory implied
warranties, including any warranty of merchantability or fitness for a particular purpose, are
expressly limited to the duration of this written warranty. Mercury Floor Machines, Inc. will not be
liable for any other damages, including but not limited to indirect or special consequential damages
arising out of or in connection with the furnishing, performance, use or inability to use the machine.
This remedy shall be the exclusive remedy of the purchaser. The warranty period is subject to the
conditions stated below.
1-Year Motor, 1-Year Service Labor
Mercury Floor Machines, Inc. warrants electric motors on all Mercury Floor Machines to be free
from defects in material and workmanship, under normal use and service for one (1) year to the
original purchaser. Parts replaced or repaired under this warranty are warranted for the remainder
of the original warranty period. Service labor charges are covered for one (1) year from the date of
purchase, when performed by a Mercury-authorized service provider. Freight charges to and from
this service provider will be covered for ninety (90) days from the purchase date. After this ninety
(90) day period, these freight charges will be paid by the equipment owner. Travel expenses are not
covered.
Wear Items on all Machines
Critical Wear Items
- bearings, capacitors, clutches, pulleys, rectifiers, relays, switches, wheels,
tires and casters are warranted for manufacturing defects for one (1) year from the purchase date.
Normal Wear Items
- belts, brushes, bumpers carbon brushes, cords, finishes, squeegees, actuating
cables and gaskets are warranted for manufacturing defects for ninety (90) days from the purchase
date.
All warranties of motors and associated components will be voided: if the machine is used as
a floor sander; if the machines is serviced by anyone other than a Mercury-authorized service
provider; if the machine is mechanically modified; or if the machine is misused or abused.
The warranty starts on the purchase date by the original purchaser from an authorized Mercury
Floor Machines, Inc. distributor, subject to proof of purchase. The machine must be registered
immediately following its purchase. The machine registration form may be completed online
at www.mercuryfloormachines.com/registration.aspx or contact Mercury Floor Machines for a
registration card. If proof of purchase cannot be identified, the warranty start date is ninety (90)
days after the date of sale to an authorized Mercury Floor Machines, Inc. distributor.
Scrub an
Entire Floor
with One
Machine!
Design and Engineering Features:
• Heavy-duty, high quality components prepare
floors to be refinished in half the time compared to
conventional stripping process.
• Chemical-free stripping used for refinishing wood
floors and scrubbing.
• Cleans edges and corners in every room – no stripper
run-off and no ruined floors under doors.
• Precision balanced weight distribution for safe, even
and aggressive cleaning with low vibration.
• Large non-marking wheels for clean transport to
protect completed areas.
• Safety enhanced interlock switch on handle leaves
both hands conveniently in control.
• Heavy-duty components provide durable and
dependable scrubbing.
• No side torque and operates in any direction.
• Ergonomic carrying handle offers operator comfort
and safety during transport.
• Convenient handle with dual switch levers for
operation with either hand.
• Totally enclosed motor for less maintenance.
• Mercury 6-Quart Backpack attachment for quick and
easy clean-up.
• Only takes minutes opposed to hours it takes for an
operator to become acquainted with a conventional
rotary machine.
© 2012 Copy Rights Reserved Mercury Floor Machines, Inc.
© 2012 Copy Rights Reserved Mercury Floor Machines, Inc.
Specifications
Model No.
DS-18
Cleaning Pad Size
12 in. x 18 in.
Motor
1
HP
Voltage/Frequency
120 V / 60 Hz
Orbital Speed
1725 RPM
Power Cable
(1) 50-Foot, 14/3-Gauge Safety Power Cord
Sound Level
70 dB
Weight
120
lbs.
Warranty
1-Year Motor, 1-Year Service Labor
One-Touch Dry Scrub
Floor Machine
Model No. DS-18
1 HP, 1725 RPM
Mercury Floor Machines, Inc.
110 South Van Brunt Street
Englewood, NJ 07631
Phone: (201) 568-4606
Toll Free: (888) 568-4606
Fax: (201) 568-7962
www.mercuryfloormachines.com
