ACTUATOR KITS
Page 2 / 5
90-845578001 JANUARY 2004
3. Drill a13 mm (1/2 in.)diameter hole through the transom in line with the center of the
pipe plug hole.
3355
a
b
a -
13 mm (1/2 in.)diameter hole
b -
Cylinder mounting pin
4. Remove the lower cylinder mounting pin and replace with the actuating pin.
5. Tighten the inner locknut to the shoulder of the actuating pin.
Actuating Pin Installation (845532A1 and 845630A1 Kits Only)
Install the outer locknut on the actuating pin and torque to the specified value.
3356
a
b
c
a -
Outer locknut
b -
Inner locknut
c -
Actuating pin
Description
Nm
lb. in.
lb. ft.
Inner locknut "b"
27
20
