![Mercury 5.7 TowSport MPI Скачать руководство пользователя страница 61](http://html1.mh-extra.com/html/mercury/5-7-towsport-mpi/5-7-towsport-mpi_manual_1773269061.webp)
Section 5 - Maintenance
90-8M0086943
eng
DECEMBER 2014
Page 53
b.
All other models:
Using appropriate connector, connect the flushing hose from the water source to the water inlet
hose (upper hose) of the seawater pickup pump. Proceed to Step 3.
6092
!
WARNING
Rotating propellers can cause serious injury or death. Never operate the boat out of the water with a propeller installed.
Before installing or removing a propeller, place the drive unit in neutral and engage the lanyard stop switch to prevent the
engine from starting. Place a block of wood between the propeller blade and the anti‑ventilation plate.
2.
If flushing the engine with the boat out of the water,
remove the propeller. Refer to boat manufacturers' instructions.
a.
Models with Walter V
‑
drive transmissions:
Disconnect water inlet hose from transmission fitting. Using appropriate
connector, connect the flushing hose. Proceed to Step 3.
6091
b.
All other models:
Using appropriate connector, connect the flushing hose from the water to the water inlet hose
(upper hose) of the seawater pickup pump. Proceed to Step 3.
6092
3. Open the water source completely.
4. Place remote control in neutral, idle speed position, and start engine. Operate engine at idle speed, in neutral, for about 10
minutes or until discharge water is clear.
5. Stop the engine.
6. Remove the flushing connector from the water inlet.
Содержание 5.7 TowSport MPI
Страница 8: ...Page iv 90 8M0086943 eng DECEMBER 2014...
Страница 32: ...Section 2 Getting to Know Your Power Package Notes Page 24 90 8M0086943 eng DECEMBER 2014...
Страница 42: ...Section 3 On The Water Notes Page 34 90 8M0086943 eng DECEMBER 2014...
Страница 48: ...Section 4 Specifications Notes Page 40 90 8M0086943 eng DECEMBER 2014...