manualshive.com logo in svg

Mercury 40 Marathon, Руководство по эксплуатации, обслуживанию и установке, Страница: 7 / 104

Поделиться
Скачать
Mercury 40 Marathon Скачать руководство пользователя страница 7

General Information

Boater's Responsibilities..................................................................................... 1

Before Operating Your Outboard........................................................................ 1

Boat Horsepower Capacity................................................................................. 1

High‑Speed and High‑Performance Boat Operation.......................................... 2

Outboard Remote Control Models ..................................................................... 2

Remote Steering Notice......................................................................................3

Lanyard Stop Switch........................................................................................... 3

Protecting People in the Water........................................................................... 6

Passenger Safety Message ‑ Pontoon Boats and Deck Boats...........................6

Wave and Wake Jumping................................................................................... 8

Impact with Underwater Hazards........................................................................9

Safety Instructions for Hand‑Tilled Outboards.................................................. 10

Exhaust Emissions........................................................................................... 10

Selecting Accessories for Your Outboard......................................................... 12

Safe Boating Suggestions................................................................................ 12

Recording Serial Number................................................................................. 14

40 Sea Pro/Marathon Specifications................................................................ 14

40 SeaPro/Marathon Component Identification................................................ 15

Transporting

Trailering Boat/Outboard ................................................................................. 17

Transporting Portable Fuel Tanks.................................................................... 17

Fuel and Oil

Fuel Requirements........................................................................................... 19

Oil Recommendation........................................................................................ 20

Fuel and Oil Ratio............................................................................................. 20

Mixing Fuel and Oil........................................................................................... 21

Filling Oil Injection System................................................................................21

Filling Fuel Tank............................................................................................... 22

eng

v

  

Содержание 40 Marathon









































































































Отзывы:

Нет отзывов