manualshive.com logo in svg

Mercury 4 TwoStroke, Руководство по эксплуатации, техническому обслуживанию и установке, Страница: 46 / 68

Поделиться
Скачать
Mercury 4 TwoStroke Скачать руководство пользователя страница 46

Gear Shifting

Your outboard has three gear shift positions to provide operation: Forward (F),

Neutral (N), and Reverse (R).
Reduce throttle speed to idle speed.

NOTE: Personal injury and/or equipment damage may occur if shifting at high

speed. Engine must be in the slow running position before shifting is attempted.
NOTE: Do not increase engine speed more than necessary in reverse.

a -

Reverse

b -

Neutral

c -

Forward

d -

Shift lever

Always shift outboard into gear with a quick motion.

•

Forward:

 Turn the throttle grip to reduce engine speed. When the engine

reaches trolling (or idling) speed, quickly pull the shift lever to the Forward

(F) position.

•

Reverse:

 Reduce engine speed, when the engine reaches trolling (or

idling) speed, quickly push the shift lever to the Reverse (R) position.

Stopping the Engine

1. Turn the throttle grip to the slow position.
2. Put the shift lever in Neutral (N) position. Run the engine for 2–3 minutes

at idling speed if it has been running at full speed.

3. Push the stop switch to stop the engine.

a -

Lanyard hook

b -

Stop switch lock

c -

Stop switch

41061

a

b

c

d

41063

a

b

c

OPERATION

  

36

eng

Содержание 4 TwoStroke





































































Отзывы:

Нет отзывов