STORAGE
eng
77
Storage Preparation
The major consideration in preparing your outboard for storage is
to protect it from rust, corrosion, and damage caused by freezing
of trapped water.
The following storage procedures should be followed to prepare
your outboard for out of season storage or prolonged storage
(two months or longer).
NOTICE
Without sufficient cooling water, the engine, the water pump,
and other components will overheat and suffer damage.
Provide a sufficient supply of water to the water inlets during
operation.
FUEL SYSTEM
IMPORTANT: Gasoline containing alcohol (ethanol or methanol)
can cause a formation of acid during storage and can damage
the fuel system. If the gasoline being used contains alcohol, it is
advisable to drain as much of the remaining gasoline as possible
from the fuel tank, remote fuel line, and engine fuel system.
Fill the fuel tank and engine fuel system with treated (stabilized)
fuel to help prevent formation of varnish and gum. Proceed with
following instructions.
• Pour the required amount of gasoline stabilizer (follow
instructions on container) into fuel tank. Tip fuel tank back
and forth to mix stabilizer with the fuel.
• Place the outboard in water or connect flushing attachment
for circulating cooling water. Run the engine for five minutes
to allow treated fuel to reach the carburetor.
Protecting External Outboard Components
• Lubricate all outboard components listed in Maintenance ‑
Inspection and Maintenance Schedule.
• Touch up any paint nicks. See your dealer for touch‑up
paint.
Содержание 4.9 TwoStroke
Страница 4: ...iv eng...
Страница 93: ...ACCESSORIES eng 85 Parts packaged with engine Fuel tank 12 L 1 5B D only Primer bulb 1set 5B D only...
Страница 94: ...ACCESSORIES 86 eng Optional Accessories 41075 a b c d e f g h i j...
Страница 96: ...ACCESSORIES 88 eng Wiring Diagram 41076 a b c d f e g h i j k l...