350.126UK User Manual
3.
Align the 2 locating slots in the smoke detector with the 2 tags on the installation panel and rotate it
clockwise until it locks into position.
4.
Depress and hold the test/hush button to check the alarm and warning LED are functioning correctly.
After testing the LED will flash every 10 seconds to inform you the unit is in hush mode. After around
10 mins the LED will flash every 40 seconds which indicates the unit is now in standard operating
mode. To enter the hush mode at any time press and hold the button until the alarm is sounded and
the LED flashes every 10 seconds.
Please note:
No user serviceable parts inside. The only replaceable part is the battery.
Test the alarm weekly and every time the battery is replaced.
When the battery power is low an intermittent beep will sound to indicate it needs replacing.
Do not use in dusty and smoky environments.
Keep out of the reach of children.
Any repairs should be carried out by qualified personnel.
Please retain this manual for future reference.
Intended for Fire Safety and installed in buildings
Essential characteristic 1: Pass
13
Essential characteristic 2: Pass
1134
Essential characteristic 3: Pass
1134-CPR-124
Essential characteristic 4: Pass
EN14604:2005/AC:2008
Essential characteristic 5: Pass
Photoelectric Smoke Detector
Essential characteristic 6: Pass
350.126UK-001
Essential characteristic 7: Pass
Essential characteristic 8: Pass
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or
commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2016. AVSL Group Ltd.
9V Battery
Security Arm
Locating slot
Test/Hush
Warning LED
Sounder
