manualshive.com logo in svg

Mercury 3.0 MPI ECT, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Mercury 3.0 MPI ECT Скачать руководство пользователя страница 57

Section 4 - Maintenance

90-8M0113856   

eng

  DECEMBER  2015

Page  49

3. Remove the spacer block between the bracket assembly and the engine block. It may be necessary to tape gently on the

spacer to allow removal.

4. Loosen the alternator. Remove and replace the alternator belt.
5. Replace the spacer block between the bracket assembly and the engine block. Install the two screws using the flat and

lockwashers removed previously. Torque the two spacer block screws.

Description

Nm

lb. in.

lb. ft.

Spacer block screws

28

21

6. Install power steering belt, if equipped. Adjust tension of both drive belts.

Description
   Deflection

6 mm ( 1/4 inches)

Replacing - Side Mount Models

Power Steering Pump Drive Belt, if equipped

1. Loosen power steering pump attaching bolts and mounting bolts.
2. Pivot power steering pump toward engine, as required, until belt can be removed.
3. Install new drive belt on pulleys. Adjust the tension to the specification following.

a -

Power steering belt

b -

Alternator belt

c -

Alternator

Description
   Deflection

6 mm ( 1/4 inches)

Alternator Belt

1. Remove power steering pump drive belt, if equipped.
2. Loosen the alternator. Remove and replace the alternator belt.
3. Install power steering belt, if equipped. Move the power steering brace to its original position and adjust tension of both

drive belts.

Description
   Deflection

6 mm ( 1/4 inches)

Changing the Water‑Separating Fuel Filter

!

 WARNING

Fuel is flammable and explosive. Ensure that the key switch is off and the lanyard is positioned so that the engine cannot

start. Do not smoke or allow sources of spark or open flame in the area while servicing. Keep the work area well ventilated

and  avoid  prolonged  exposure  to  vapors.  Always  check  for  leaks  before  attempting  to  start  the  engine,  and  wipe  up  any

spilled fuel immediately.

1. Shut off the engine and allow to cool for 12 hours.
2. Close the fuel supply valve, if equipped.
3. Wrap the water separating fuel filter with a cloth to help catch any fuel spills or spray.
4. Remove and discard the water separating fuel filter and sealing ring from the mounting bracket.

a

b

c

17296

Содержание 3.0 MPI ECT


















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды