Mercury 2007 Milan Скачать руководство пользователя страница 23

Страница: 23 / 281

The default setting is

off;

increasing your vehicle speed will not change

the volume level.

Adjust

1–7:

Increasing this setting from 1 (lowest setting) to 7 (highest

setting) allows the radio volume to automatically change slightly with
vehicle speed to compensate for road and wind noise.

Recommended level is

1–3;

SPEED OFF turns the feature off and level 7

is the maximum setting.

Track/Folder mode:

Available only on MP3 discs in CD mode.

In track mode, press

SEEK, SEEK

to scroll through all tracks on

the disc
In folder mode, press

SEEK, SEEK

to scroll through tracks

within the selected folder.
Press

FOLDER, FOLDER

to access the previous/next folder (if

available).

COMPRESS (Compression):

Available only in CD/MP3 mode. Press

MENU until COMPRESS ON/OFF appears in the display. Use

SEEK, SEEK

to toggle ON/OFF. When COMPRESS is ON, the

system will bring the soft and loud CD passages together for a more
consistent listening level.

AUX:

Press repeatedly to cycle

through LINE IN (auxiliary audio
mode, if equipped) and SAT1, SAT2
and SAT3 modes (satellite radio, if equipped).
For location and further information on auxiliary audio mode, refer to

Auxiliary input jack

later in this chapter.

Satellite radio is available only with a valid SIRIUS radio
subscription. Check with your authorized dealer for availability.

SEEKIn radio mode,

press

to access the

previous/next strong station.

In CD mode

, press

access the previous/next CD track.

2007 Milan

(mln)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

Содержание 2007 Milan


























































































































































































































































































Результаты поиска

Содержание 2007 Milan

Отзывы:

Похожие инструкции для 2007 Milan

Бренды по названию

Популярные бренды

Mercury 2007 Milan, Руководство пользователя

Результаты поиска

Содержание 2007 Milan

Отзывы:

Похожие инструкции для 2007 Milan

Бренды по названию

Популярные бренды