Mercury 2006 Скачать руководство пользователя страница 22

Страница: 22 / 272

10.

Fast forward:

Press to

manually advance in a CD track.

11.

Rewind:

Press to manually

reverse in a CD track.

12.

Memory presets:

To set a

station: Select frequency band
AM/FM; tune to a station, press and
hold a preset button until sound returns.

13.

Scan:

Press for a brief sampling

of radio stations or CD tracks. Press
again to stop.

14.

Seek:

Press to access the

previous strong station or track.

15.

AM/FM:

Press to select AM/FM

frequency band.

16.

ON/OFF/Volume:

Press to turn

ON/OFF. Turn to increase/decrease
volume.
If the volume is set above a certain
level and the ignition is turned off,
the volume will come back on at a
“nominal” listening level when the ignition switch is turned back on.

17.

CD:

Press to enter CD mode. If

a CD is already loaded into the
system, CD play will begin where it
ended last.

18.

LOAD:

Press to load a CD.

Press LOAD and a memory preset
to load to a specific slot. Press and
hold to autoload up to six CDs.

19.

CD eject:

Press to eject a CD.

Press and hold to auto eject all CDs
present in the system. If there is no
CD present, the display will read NO CD.

2006 Montego

(mgo)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

Содержание 2006

















































































































































































































































































Результаты поиска

Содержание 2006

Отзывы:

Mercury 2006, Руководство пользователя, Страница: 22 / 272

Результаты поиска

Содержание 2006

Отзывы: