Mercury 2004 Mountaineer, Руководство пользователя

Страница: 87 / 280

To open the liftgate window, press the 5
•
6 control within five
seconds.
To lock all doors, liftgate and liftgate window, press the 7
•
8 and
the 9
•
0 at the same time. Note: The driver’s door must be closed. You
do not need to enter the keypad code first.
Autolock
The autolock feature will lock all the doors, liftgate and liftgate window
when:
•
all the doors, the liftgate and liftgate window are closed,
•
the ignition is in the 3 (ON) position,
•
you shift into any gear putting the vehicle in motion, and
•
the brake pedal is released and the vehicle attains a speed greater
than 8 km/h (5 mph).
The autolock feature repeats when:
•
any door, liftgate or liftgate window is opened then closed while the
ignition is in the 3 (ON) position, and
•
you put the vehicle in motion by releasing the brake pedal and the
vehicle attains a speed greater than 8 km/h (5 mph).
Deactivating/activating autolock
Your vehicle comes with the autolock feature activated. There are four
methods to enable/disable this feature: One is through your dealer, the
second with a power door unlock/lock sequence, the third with the
keypad, and the fourth by using the message center (if equipped).
Before following the activation or deactivation procedures, make sure
that the anti-theft system is not armed, ignition is off, and all vehicle
doors, liftgate and liftgate window are closed.
Power door unlock/lock procedure
You must complete steps 1-5 within
30 seconds or the procedure will
have to be repeated. If the
procedure needs to be repeated,
you must wait 30 seconds.
1. Turn the ignition to the 3 (ON)
position.
2. Press the power door unlock
control three times.
2004 Mountaineer (mnt)
Owners Guide (post-2002-fmt)
USA English
(fus)
Locks and Security
87