Mercury 2002 Villager Скачать руководство пользователя страница 118 | Manualshive

Страница: 118 / 256

Mercury 2002 Villager Скачать руководство пользователя страница 118

•

6 way (driver seat)

•

4 way (passenger seat)

Rotate the vertical control to adjust
the seatback.

Memory seats and mirrors (if equipped)

Some vehicles may only have the
memory feature available for the
seats.

The memory seat control is located
on the driver’s door panel. The
control operates with the ignition in
the OFF position or the ignition is in
the ON position and the vehicle is in
P (Park) or N (Neutral).

The two buttons provide three
memory positions, one individual position for each button and a third
position obtained by pressing buttons 1 and 2 simultaneously.

Position three (pressing 1 and 2 simultaneously) is always full rearward
and downward for exit mode, but is not programmable.

To record the memory positions:

1. Move the seat and mirror to the desired position using the manual
controls.

2

1

MEMORY

SEAT

Seating and Safety Restraints

118

«
...
116
117
118
119
120
...
»

Содержание 2002 Villager

































































































































































































































































Отзывы:

Нет отзывов