FEATURES AND CONTROLS
82
eng
HELM TRANSFER
!
WARNING
Avoid serious injury or death from loss of boat control. The
boat operator should never leave the active station while
engine is in gear. Helm transfer should only be attempted while
both stations are manned. One‑person helm transfer should
only be performed while engine is in neutral.
NOTE: Idle position is preferred when doing a helm transfer. If
conditions do not allow the remote control to be placed at idle
position, a helm transfer can be done while in gear.
NOTE: The active light on the remote control will be illuminated
at the helm that is in control of the engine.
The helm transfer function allows the boat operator to select
which helm is in control of engine operation. Pressing the throttle
only/station select button two times allows engine control to be
transferred to a new helm. When a helm transfer is initiated, the
control will automatically start adjusting engine RPM and gear
position to match the control handle setting at the new helm.
Adjust the control handles to the desired throttle and gear
position.
NOTE: There is a 10 second time frame to complete a helm
transfer. If the helm transfer is not completed, the action will be
cancelled and a double beep will sound. Pressing the throttle
only/station select button again will reinitiate a helm transfer.
1. Place active remote control lever to idle position.
2. Proceed to the inactive helm and position remote control
lever to the idle position.
Содержание 200 OptiMax DTS
Страница 6: ...vi eng ...
Страница 12: ...xii eng ...