manualshive.com logo in svg

Mercury 2.5 TwoStroke, Руководство по эксплуатации, техническому обслуживанию и установке

Поделиться
Скачать
Mercury 2.5 TwoStroke Скачать руководство пользователя страница 40

Remote Control Features

Your boat may be equipped with the Mercury Precision or Quicksilver remote

control shown. If not, consult your dealer for a description of the functions and

operations of the remote control.

a -

Remote control handle ‑ Forward (F), Neutral (N), Reverse (R)

b -

Throttle only lever

c -

Ignition key switch

d -

Lanyard stop switch

Tilting Outboard

BASIC TILTING OPERATION

The tilt feature allows the operator to tilt the outboard to a higher tilt angle for

operation in shallow water, or tilt the outboard to the full up position.
When running the outboard, keep the tilt lever in the release position. This

allows the outboard to return to the running position if the outboard should hit

an underwater obstacle and be lifted up.
Moving the tilt lever to the tilt position will allow the outboard to lock into the

shallow water drive position or the full up position.

37982

a

b

c

d

FEATURES AND CONTROLS

  

30

eng

Содержание 2.5 TwoStroke



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды