Mercury 15 TwoStroke, Руководство по эксплуатации, обслуживанию и установке

Страница: 48 / 108

• If adjustment is necessary, loosen the trim tab bolt and make small
adjustments at a time.
• After the adjustment, securely tighten the trim tab bolt.
NOTE: Check for looseness of the bolt and the trim tab at regular intervals. Due
to corrosion, the trim tab will wear down over time.
The trim tab is located under the anti‑ventilation plate.
• If the boat steers toward the left, set the trim tab in the direction of B.
• If the boat steers toward the right, set the trim tab in the direction of C.
a - Trim tab
b - Steers toward the left, set the trim tab in the direction of B
c - Steers toward the right, set the trim tab in the direction of C
d - Turning left
e - Turning right
IMPORTANT: The trim tab also acts as an anode to prevent galvanic corrosion.
Do not apply any paint, grease, or other material to the surface of the trim tab.
NOTE: Trim tab adjustment will have little effect reducing steering torque if the
outboard is installed with the anti‑ventilation plate approximately 50 mm (2 in.)
or more above the boat bottom.
37494
a
b
c
d
e
FEATURES AND CONTROLS
38
eng