Mercury 115 efi страница 61 Скачать руководство пользователя

Страница: 61 / 62

OWNER SERVICE ASSISTANCE

Local Repair Service

Always return your outboard to your local authorized dealer should the need for service arise. Only he has the

factory trained mechanics, knowledge, special tools, equipment, and genuine parts and accessories to properly

service your engine should the need occur. He knows your engine best.

Service Away From Home

If you are away from your local dealer and the need arises for service, contact the nearest authorized dealer. Refer

to the Yellow Pages of the telephone directory. If, for any reason, you cannot obtain service, contact the nearest

Mercury Marine Service Office.

Parts And Accessories Inquiries

All inquiries concerning genuine replacement parts and accessories should be directed to your local authorized

dealer. The dealer has the necessary information to order parts and accessories for you. When inquiring on parts

and accessories, the dealer requires the model and serial number to order the correct parts.

Service Assistance

Your satisfaction with your outboard product is very important to your dealer and to us. If you ever have a problem,

question or concern about your outboard product, contact your dealer or any authorized Mercury Marine dealership.

If additional assistance is required, take these steps.
1.

Talk with the dealership's sales manager or service manager. If this has already been done, then contact the

owner of the dealership.

Should you have a question, concern, or problem that cannot be resolved by your dealership, please contact

Mercury Marine Service Office for assistance. Mercury Marine will work with you and your dealership to

resolve all problems.

The following information will be needed by the service office:
•

Your name and address

•

Daytime telephone number

•

Model and serial number of your outboard

•

The name and address of your dealership

•

Nature of problem

Mercury Marine Service Offices

For assistance, call, fax, or write. Please include your daytime telephone number with mail and fax correspondence.

United States

Telephone

(920) 929-5040

Mercury Marine

W6250 W. Pioneer Road

P.O. Box 1939

Fond du Lac, WI 54936-1939

Fax

(920) 929-5893

Website

www.mercurymarine.com

Canada

Telephone

(905) 567-6372

Mercury Marine Ltd.

2395 Meadowpine Blvd.

Mississauga, Ontario L5N 7W6

Canada

Fax

(905) 567-8515

Содержание 115 efi































































Результаты поиска

Содержание 115 efi

Отзывы:

Похожие инструкции для 115 efi

Бренды по названию

Популярные бренды

Mercury 115 efi, Руководство пользователя

Результаты поиска

Содержание 115 efi

Отзывы:

Похожие инструкции для 115 efi

Бренды по названию

Популярные бренды