Mercury 1000 Induction, Руководство пользователя

Страница: 13 / 48

9
n
DO NOT put it crossways – it will not fit properly and
will be unstable (Fig. 2.12).
n DO NOT put it on any other burners – it is not
designed to fit in any of the other pan supports.
Position the griddle over the hotplate burners resting on the
pan support. Check that it is securely located.
The griddle can be lightly brushed with cooking oil before
use. Light the hotplate burners. Adjust the flame heights to
suit.
Preheat the griddle for
a maximum of 5 minutes
before
adding food. Leaving it longer may cause damage. Turn the
control knobs towards the low position, marked with the
small flame symbol, to reduce the burner flames.
n Always leave space around the griddle for the gases
to escape.
n
NEVER fit two griddles side by side.
After cooking, allow the griddle to cool before cleaning.
The Glide-out Grill™
(Fig. 2.13)
n WARNING: When the trivet has been removed from
the grill pan, please ensure that the grill pan and
cradle are fully returned into the grill chamber. The
grill pan door MUST remain open.
n Accessible parts may be hot when the broiler is in
use. Young children should be kept away.
n
Never close the grill door when the grill is on.
1.
For best results, slide the carriage back into the grill
chamber. The grill trivet can be removed and the
food placed on it while you are waiting for the grill to
preheat.
2. DO NOT
leave the grill on for more than a few moments
without the grill pan underneath it, otherwise the knobs
may become hot.
3.
Once the grill has preheated, slide the carriage out
again. With the trivet back in place with the food on it,
slide the carriage back into the grill chamber. Make sure
that it is pushed right in.
The grill pan trivet can be turned to give four grilling heights
by a combination of turning it back to front and turning it
upside down. See chapter
Using the Glide-out Grill™
.
Fig. 2.11
Fig. 2.12
Fig. 2.13