Mercury 10 Marathon страница 18 Скачать руководство пользователя

Страница: 18 / 94

WARRANTY INFORMATION

DISCLAIMERS AND LIMITATIONS:
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. TO

THE EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED

WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE

EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL

DAMAGES ARE EXCLUDED FROM COVERAGE UNDER THIS

WARRANTY. SOME STATES/COUNTRIES DO NOT ALLOW FOR THE

DISCLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED

ABOVE, AS A RESULT, THEY MAY NOT APPLY TO YOU. THIS

WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY

ALSO HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE TO

STATE AND COUNTRY TO COUNTRY.

Warranty Coverage And Exclusions

The purpose of this section is to help eliminate some of the more common

misunderstandings regarding warranty coverage. The following

information explains some of the types of services that are not covered by

warranty. The provisions set forth following have been incorporated by

reference into the Three Year Limited Warranty Against Corrosion Failure,

the International Limited Outboard Warranty, and the United States and

Canada Limited Outboard Warranty.
Keep in mind that warranty covers repairs that are needed within the

warranty period because of defects in material and workmanship.

Installation errors, accidents, normal wear, and a variety of other causes

that affect the product are not covered.
Warranty is limited to defects in material or workmanship, but only when

the consumer sale is made in the country to which distribution is authorized

by us.
Should you have any questions concerning warranty coverage, contact

your authorized dealer. They will be pleased to answer any questions that

you may have.

GENERAL EXCLUSIONS FROM WARRANTY

1. Minor adjustments and tune-ups, including checking, cleaning or

adjusting spark plugs, ignition components, carburetor settings, filters,

belts, controls, and checking lubrication made in connection with

normal services.

Содержание 10 Marathon































































































Результаты поиска

Содержание 10 Marathon

Отзывы:

Похожие инструкции для 10 Marathon

Бренды по названию

Популярные бренды

Mercury 10 Marathon, Руководство пользователя

Результаты поиска

Содержание 10 Marathon

Отзывы:

Похожие инструкции для 10 Marathon

Бренды по названию

Популярные бренды