Mercury Floor Machines BOSS-II, Руководство по безопасности, эксплуатации и техническому обслуживанию

Страница: 7 / 10

(14) BOSS-II Floor Machine BOSS-II Floor Machine (7)
3.0 Assembly Instructions
3.1 Handle Installation
This machine handle (1) has been custom fit to its
mounting yoke (2) at the factory and then taken apart for
shipping. For easy assembly, make sure that the handle
number on the tag (see right) matched the serial number
stamped on the chassis.
You will need 7/16” wrenches to complete the assembly:
1. Remove the handle and mounting hardware from the
carton. Bolts, nuts, washers and the locking lever
assembly are in the plastic bag attached to the handle.
2. Position the handle (1) over the mounting yoke
(2) with the power cord (3) facing away from the
motor. Push the tube down until the bolt holes are
lined up.
3. Insert the mounting bolts (4) into the bolt holes
from the back of the machine. Secure each bolt
with a locking nut (5). The locking nuts will face
the motor.
4. The handle mounting collar (6) is designed to slide
freely up and down the handle tube. This feature
allows the handle to be adjusted for the comfortable
operation of all users. Align the mounting collar (6)
and the two bent handle braces (7).
5. Remove the lever assembly parts from the plastic
bag.
• Place the thick spacer with a rectangular hole (9)
onto the locking lever shaft (8). The spacer must
fit onto the rectangular neck of the lever.
• Insert the shaft through the mounting hole in the
right handle brace, the mounting collar and the left
handle brace.
• Place the spacer (10) on the shaft.
• Place the split washer (11) on the shaft.
• Adjust the wing nut for tightness. When correctly
installed, the collar slides easily when the cam-
engineered locking lever is “up,” but is firmly
fixed when the lever is “down.”
8.0 Machine Parts List
Item Description Part No. Qty.
1 Switch Box Back A-104 1
2 Handle Tube Screw B-23 2
3 Switch Box Closing Screw B-21 4
4 Strain Relief Clip M-213 1
5 Ground Wire Screw B-68 2
6 Rubber Spacer - Yellow M-218-Y 2
7 Hand Grip M-218 2
8 Handle Tube Insert M-247 1
9 Handle Tube Assembly M-206 1
10 Cable Hook Screw B-2 2
11 Cable Hook A-164 1
12 Sliding Collar A-111 1
13 Cam Washer B-37 1
14 Cam Lock Wing Nut B-25 1
15 Cam Split Washer B-39 1
16 Bent Brace M-216 2
17 Yoke Bolt B-18A 2
18 Yoke Nut B-19 2
19 Handle Tube Cable G-16 1
20 Black Rubber Cable Connector M-249 1
21 Cable Grommet B-63 1
22 Rectangular Hole Cam Washer B-67 1
23 A Cam Assembly C-100 1
23B Complete Cam Assembly Kit (Includes 1 each of CCA 1
Drawing Items #13, 14, 15, 22, 23)
24 50-Foot Cable, 14/3-Gauge - Yellow G-14-15-Y 1
25 Switch Mounting Plate G-30-B 1
26 Switch Plate Screw B-1 2
27 Int. Tooth Lock Washer (for Switch) B-35 1
28 Insulated Flag Wire Connector G-48 2
29 On-Off Switch and Plate Assembly G-30-AB 1
30 Lock Washer B-33 1
31 Trigger Return Spring G-30-CT057 4
32 Label for Switch Box 1
33 Switch Box Front A-103 1
34 Wire Connector G-47 1
35 Trigger A-105 2
36 16” Crossbar M-211-A 1
37 Safety Interlock Assembly SIA-1 1
38 Trigger Pin B-70 2
39 Crossbar Screw B-22 2
40 Acorn Nut for Yoke Pin B-8 2
41 Rubber Yoke Spacer B-5 2
42 Yoke Pin B-7 1
43 Yoke A-1001 1
44 Drip Cap Mounting Screw B-151 3
45 66 Frame Drip Cap Cover M-242 1
46 66 Frame Drip Cap Cover Bumper - Yellow M-239-Y 1
47 Two-Speed Motor Screen SCR-02 1
48 Two-Speed Motor Screen Bumper - Yellow M-238-Y 1
49 Cork Drip Cap Gasket M-248 1
50 Two-Speed Motor, 66 Frame, 1.5 HP w/ Gearbox 115V MOTOR/GB-TS 1
51 Gear Box, 11:1, Triple Planetary GB96008 1
52 Two-Speed Hi-Lo Switch Box SCAP-2 1
53 Two-Speed Hi-Lo Switch HILO-TS 1
54 Hub Caps V0038 2
55 Spring Washer B-51 4
56 6” Wheels M-250 2
57 ½” Flat Washer B-29 2
58 Spring B-30 2
59 Axel M-240 1
60 Main Machine Frame A-166 1
61 Thumb Screw B-96 3