MerCruiser Tow Sports 5.7 MPI Скачать руководство пользователя

Страница: 13 / 102

Section 1 - Warranty

90-865253073 DECEMBER 2007

Page 5

Conditions That Must Be Met in Order to Obtain Warranty Coverage

Warranty coverage is available only to retail customers that purchase from a dealer authorized by Mercury Marine to distribute the

product in the country in which the sale occurred, and then only after the pre‑delivery inspection process specified by Mercury Marine

is completed and documented. Warranty coverage becomes available upon proper registration of the product by the authorized

dealer. Inaccurate warranty registration information regarding recreational use or subsequent change of use from recreational to

commercial (unless properly reregistered) may void the warranty at the sole discretion of Mercury Marine. Routine maintenance

must be performed according to the maintenance schedule in the Operation, Maintenance & Warranty manual in order to obtain

warranty coverage. Mercury Marine reserves the right to make any warranty coverage contingent upon proof of proper maintenance.

What Mercury Marine Will Do

Mercury Marine's sole and exclusive obligation under this warranty is limited to, at our option, repairing a defective part, replacing

such part or parts with new or Mercury Marine certified remanufactured parts, or refunding the purchase price of the Mercury Marine

product. Mercury Marine reserves the right to improve or modify products from time to time without assuming an obligation to modify

products previously manufactured.

How to Obtain Warranty Coverage

The customer must provide Mercury Marine with a reasonable opportunity to repair and reasonable access to the product for warranty

service. Warranty claims shall be made by delivering the product for inspection to a Mercury Marine dealer authorized to service the

product. If the purchaser cannot deliver the product to such a dealer, written notice must be given to Mercury Marine. Mercury Marine

will then arrange for the inspection and any covered repair. The purchaser in that case shall pay for all related transportation charges

and travel time. If the service provided is not covered by this warranty, the purchaser shall pay for all related labor and material and

any other expenses associated with that service. The purchaser shall not, unless requested by Mercury Marine, ship the product or

parts of the product directly to Mercury Marine. Proof of registered ownership must be presented to the dealer at the time warranty

service is requested in order to obtain coverage.

What Is Not Covered

This limited warranty does not cover the following:

•

Routine maintenance items

•

Adjustments

•

Normal wear and tear

•

Damage caused by abuse

•

Abnormal use

•

Use of a propeller or gear ratio that does not allow the engine to run in its recommended RPM range (see the Operation,

Maintenance & Warranty manual)

•

Operation of the product in a manner inconsistent with the recommended operation and duty cycle section of the Operation,

Maintenance & Warranty manual

•

Neglect

•

Accident

•

Submersion

•

Improper installation (proper installation specifications and techniques are set forth in the installation instructions for the product)

•

Improper service

•

Use of an accessory or part that was not manufactured or sold by Mercury Marine and that damages the Mercury product

•

Jet pump impellers and liners

•

Operation with fuels, oils, or lubricants that are not suitable for use with the product (see the Operation, Maintenance & Warranty

manual)

•

Alteration or removal of parts

•

Water entering the engine through the fuel intake, air intake, or exhaust system or damage to the product from insufficient

cooling water caused by blockage of the cooling system by a foreign body

•

Running the engine out of water

•

Mounting the engine too high on the transom

•

Operating the boat with the engine over trimmed

Содержание Tow Sports 5.7 MPI







































































































Результаты поиска

Содержание Tow Sports 5.7 MPI

Отзывы:

Похожие инструкции для Tow Sports 5.7 MPI

Бренды по названию

Популярные бренды

MerCruiser Tow Sports 5.7 MPI, Руководство пользователя

Результаты поиска

Содержание Tow Sports 5.7 MPI

Отзывы:

Похожие инструкции для Tow Sports 5.7 MPI

Бренды по названию

Популярные бренды