Section 3 - On The Water
Page 54
90-8M0053363
eng
NOVEMBER 2010
3. Select Screen Options.
4. Select the mode you want to change.
5. Select the option you desire.
6. Press × to exit.
Cruise Control
The VesselView system features integrated throttle cruise control (cruise), which allows the operator to limit the peak RPM of
choice below Wide Open Throttle (WOT). This feature requires VesselView. Refer to the owner's manual provided with your
VesselView for operation instructions.
These additional notes are exclusive to your package:
•
You can change or disengage cruise through the screen at any time.
•
Cruise resets when the key is turned off.
•
If the cruise limit is changed while the levers are at WOT, cruise gradually changes to the new speed.
•
Cruise does not disengage if the ERC levers are at a higher engine speed than the actual RPM. Bring the levers back to the
forward detent to disengage.
After Break‑In Period
To help extend the life of your Mercury MerCruiser power package:
•
Ensure the propeller allows the engine to operate at or near the top of the specified WOT RPM range (Refer to
Specifications
and
Maintenance
) when at full throttle with a normal boat load.
•
Operate at 3/4 throttle setting or lower. Refrain from prolonged operation at WOT RPM.
•
Change the engine oil and oil filter. Refer to
Maintenance
.
End of First Season Checkup
At the end of the first season of operation, contact an authorized Mercury MerCruiser dealer to discuss and/or perform scheduled
maintenance items. If you are in an area where the product is operated continuously, year‑round, you should contact your dealer
at the end of the first 100 hours of operation or once yearly, whichever occurs first.
Axius Premier (If equipped)
Axius Premier Touchpad
General Information
NOTE: Not all of the functions of the Axius system work when DTS functions are engaged. Disengage the DTS functions to use
the functions of Axius track pad.
•
Axius Premier functions are controlled through the Axius touchpad only.
•
Axius Premier touchpad screens appear on the VesselView for three seconds.
•
Pressing any button on VesselView dismisses the Axius Premier CAN touchpad screen from the VesselView screen, unless
the screen was chosen from the VesselView environment menu.
The following information shows the location and explains the function of the Axius touchpad lights and buttons.
Heading Adjustment and Override
When Auto Heading is engaged, the steering wheel feels locked into a detent. Approximately 3.4–4.5 kg (8–10 lb.) of force are
required to overcome this detent. Manually overcoming the steering wheel's detent puts Axius into standby mode.
1. When Auto Heading is engaged the "TURN" buttons provide a 10° course correction for each press to the port or starboard.
2. The joystick provides a 1° course correction for each press to the port or starboard.
Standby
•
In standby mode, the display shows a digital compass value and the angle of the drives.
•
The compass value is the current heading from the Axius CAN.
•
The icon labeled "OFF" indicates the Axius track pad is not engaged.
Standby and Active Lights
Axius Premier trackpad is off when the "STANDBY" light is illuminated. You must press a button to activate Axius
Содержание Axius 350
Страница 4: ......
Страница 82: ...Section 3 On The Water Notes Page 74 90 8M0053363 eng NOVEMBER 2010 ...
Страница 122: ...Section 5 Maintenance Notes Page 114 90 8M0053363 eng NOVEMBER 2010 ...
Страница 138: ...Section 6 Storage Notes Page 130 90 8M0053363 eng NOVEMBER 2010 ...