EXi-F
positive pressure smoke control system
„MERCOR” S.A. –
Specifications are subject to change without notice. Version DTR_EXIF_EN_20220516
Page
27
/ 28
6.
TRANSPORT AND STORAGE
______________________________________
mcr Omega control unit with the differential pressure transmitter (mcr ICS or Beck 485M) is
packed individually in a carton box and secured against mechanical damage. The carton box for large
units is fixed to the wooden pallet. The unit can be transported by any means provided that it is
protected against weather conditions. During transport, the unit is placed on the base plate (do not lean
on optical indicators or control fittings). Check the device for damage during transport. Store indoors
protected against weather conditions. Insulate the device when possible.
The air supply units with auxiliary components (duct smoke detectors, shut-off dampers) for mcr
EXi-F system (for transport and storage) are delivered on pallets.
Do not throw or tilt the packaging during transport and handling. The fans can be transported by any
means provided that they are protected against weather conditions. Protect the fans against shifting in
transport. Check the fan for damage during transport.
Store indoors:
no dust, corrosive vapours and gases or other aggressive chemical fumes which may damage
the insulation or structural components of the motor or fan;
maximum relative humidity up to 80% at + 20ºC;
ambient temperature –20ºC to +40ºC;
no vibrations.
7.
MAINTENANCE AND SERVICING
___________________________________
„MERCOR” S.A. products require periodical inspections and maintenance at least every 12
months throughout its operating period, i.e. warranty and post-warranty period. Inspections and
maintenance must be carried out by the device manufacturer or a service centre authorized by
„MERCOR” S.A.
The service inspections of fire protection devices are required by the § 3 sec. 3 of the Regulation of the
Minister of Interior and Administration of 7 June 2010 on fire protection of buildings, other construction
facilities and sites (Journal of Laws Dz. U. 2010 no. 109, item 719).
The following are recommended between inspections:
Check electrical connections for mechanical damage.
Check if the supply voltage for the devices is within the following tolerances:
24 V±10% for electric actuators
24 V±2% for electromagnetic releases
230 V ±10% for electrical actuators
24 V±2% for electromagnetic releases
Check device bodies for mechanical damage.
Check for obstacles which may affect correct operation of the devices.
To enable inspections, servicing and warranty related operations, including checks and repairs, User
must provide access to the device by removing thermal insulation, suspended ceilings and any other
systems preventing access to the device etc.
Install cleanout, e.g. mcr KRW for all duct-mounted devices.
Provide access to the roof (ladder or lift) for all roof-mounted devices.
For any issues regarding inspections, maintenance and servicing please contact „MERCOR” S.A.
Service Department at
,
phone 058/ 341 42 45 ext. 170 or fax 058/ 341 39 85 office hours 8 – 16 (Mon-Fri).
8.
WARRANTY TERMS AND CONDITIONS
______________________________
1. „MERCOR” S.A. provides a 12-month quality guarantee for all its products from the date of
purchase, unless otherwise stated in the purchase contract.
2. „MERCOR” S.A. shall repair any product defects identified within the warranty period within 21
days from a written notification and after providing a proof of purchase or purchase contract,
subject to par. 6.
