Using the Tanning Bed
Step 1. Determine your exposure time as outlined in the preceding section.
Step 2. If using indoor tanning lotion, apply before getting into the bed. Your Authorized
Dealer can assist you with the proper tanning lotion for your skin type.
Step 3. Put on goggles.
Step 4. Activate the timer according to the instructions to follow.
Step 5. Lift canopy. Lie down on the bench (face up). For best results, position the
canopy as close to you as unit allows. When the timer reaches 0, the lamps will
automatically shut off. To end the session before your pre-set time, simply raise
the canopy and step out of the tanning bed.
Step 6. Return the canopy to the upright position before attempting to sit up.
Timer Instructions
This model is equipped with a 10 minute digital timer.
Automatic Shut-off Timer
Your tanning bed is equipped with an internal backup shut-off timer which will
automatically turn off your tanning system after 11 minutes. This important safety
feature prevents the user from resetting the timer before the end of the pre-set maximum
time interval.
Caring For and Maintaining Your Tanning Bed
THE TANNING BED SHOULD BE COMPLETELY SHUT DOWN AND
UNPLUGGED FROM POWER SOURCE AT LEAST TWO (2) FULL HOURS
BEFORE ANY CLEANING OR MAINTENANCE TO ALLOW THE TANNING
BED TO ADEQUATELY COOL DOWN!!!!
www.mercola.com
13
To start a session, press the Set Button on the timer. The time will go to the maximum
time then count down. The lamps will turn automatically. You can decrease the time by
pressing the Set Button. To cancel a session, press the Start/Stop button on the timer.
The display will go to a 0.
Checking Bed Hours
Make sure the timer shows a 0. Press and hold both buttons. The timer will flash two
numbers, then two other numbers, pause, two numbers, pause, etc...These are the bed hours.
The first set of numbers are the thousands and hundreds digits for the bed hours. The second
set of numbers are the tens and ones digits for the bed hours. For example, if the display
flashes the numbers 53, then 14, pauses then repeats, then the total bed hours stored is 5314.
The highest value that can be displayed is 9999.
