SITE PREPARATION
WARNING:
KEEP THIS UNIT FREE AND CLEAR OF COMBUSTIBLE MATERIALS. DO NOT PLACE
THIS UNIT ON A COMBUSTIBLE SURFACE!
BEFORE INSTALLATION
Upon receipt of this unit, immediately unpack and remove any protective packaging to inspect for possible concealed
shipping damage. If unit is found to be damaged, save all packing materials and contact your delivery carrier within fi ve
(5) days. If there is apparent damage:
In U.S.A. and Canada:
Arrangements should be made to fi le a claim against the carrier as Interstate Commerce Regula-
tions require that the claim must be initiated by the consignee.
In Other Countries:
Freight terms will be developed and extended on an individual basis.
Failure to follow these instructions will negate Merco’s or your ability to fi le claims and receive compensation for shipping
damage.
Choose a well-ventilated location. Place the unit on a non-combustible table or counter capable of supporting the weight
of the unit. The power supply must be in accordance with the specifi cations on the data plate located on the rear of the
unit. It should be installed on a dedicated service line with no other equipment on the circuit. The unit must be positioned
so that the units’ plug is accessible. (For CE units only, if the power cord is damaged it should only be replaced by the
manufacturer or an Authorized Service Agent during the warranty period.)
PART NO.
MODEL
VOLT
HZ.
WATTS
AMPS
PHASE
CORD/PLUG
WEIGHT
16001*
IT-18
208
60
2340
11.25
Single
6’ NEMA 6-20P
47 lbs. / 21.3 kg.
16003**
IT-18
230
50
2280
9.91
Single
CEE 7/7
47 lbs. / 21.3 kg.
16005
IT-18
208
60
2340
11.25
Single
6’ NEMA 6-20P
47 lbs. / 21.3 kg.
ELECTRICAL SPECIFICATIONS
* 50% Stand-by Energy Saving Mode.
** CE Approved Unit.
