background image

20352498w   Rev 03/20 

9 of 9

The life science business of Merck operates  

as MilliporeSigma in the U.S. and Canada.

Merck, Millipore and Sigma-Aldrich are trademarks of Merck KGaA, Darmstadt, Germany or its 

affiliates. All other trademarks are the property of their respective owners. Detailed information 

on trademarks is available via publicly accessible resources.

© 2020 Merck KGaA, Darmstadt, Germany and/or its affiliates. All Rights Reserved.

Product Ordering Information

The mA700 can be purchased with different power 

supply cords to accomodate a variety of locations. 

Purchase products online at 

SigmaAldrich.com/products

.

Model

Description

Catalog 

Number

mA700 

Essential 

Power 

Supply

mA700 Power Supply with cord for 

the US, Canada, and locations 

using NEMA 5-15P (YP12) plugs

MA700-US

mA700 Power Supply with cord for 

France, Germany, and locations 

using CEE 7/7 (YP22) plugs 

MA700-EU

mA700 Power Supply with cord for 

the UK, Ireland and locations using 

type G (YP61) plugs 

MA700-UK

mA700 Power Supply with cord for 

Japan and locations using YP18 

plugs 

MA700-NI

mA700 Power Supply with cord for 

China and locations using Type I 

(YP03) plugs 

MA700-ZH

Also available

mA400 

Basic 

Power 

Supply

mA400 Power Supply with cord for 

the US, Canada, and locations 

using NEMA 5-15P (YP12) plugs

MA400-US

mA400 Power Supply with cord for 

France, Germany, and locations 

using CEE 7/7 (YP22) plugs

MA400-EU

mA400 Power Supply with cord for 

the UK, Ireland, and locations 

using type G (YP61) plugs

MA400-UK

mA400 Power Supply with cord for 

Japan and locations using YP18 

plugs

MA400-NI

mA400 Power Supply with cord for 

China and locations using Type 1 

(YP03) plugs

MA400-ZH

Support

Notice

We provide information and advice to our customers 

on application technologies and regulatory matters 

to the best of our knowledge and ability, but without 

obligation or liability. Existing laws and regulations are 

to be observed in all cases by our customers. This also 

applies in respect to any rights of third parties. Our 

information and advice do not relieve our customers of 

their own responsibility for checking the suitability of 

our products for the envisaged purpose.
The information in this document is subject to change 

without notice and should not be construed as a 

commitment by the manufacturing or selling entity, or 

an affiliate. We assume no responsibility for any errors 

that may appear in this document.

Contact Information

For the location of the office nearest you, go to 

SigmaAldrich.com/offices

.

Legal Manufacturer

EMD Millipore Corporation 

400 Summit Drive, Burlington, MA, USA

Technical Assistance

Visit the tech service page on our web site at 

SigmaAldrich.com/techservice

.

Standard Warranty

The applicable warranty for the products listed in this 

publication may be found at 

SigmaAldrich.com/terms

.

Содержание Millipore mA700










Отзывы: