P 3
Please retain product label and instructions for future reference
Pre Assembly
Before assembling remove the transportation
blocks from the bottom of each panel.
Step 1
To fix the Windows (
No. 8
) into the panels
that accomodate a window. First fix the
Window Block to the Window as shown
with 1x30mm screw.
Place the Window into the window hole
and fix by screwing though the Window
Block (
No. 25
) with 2x30mm screws as
shown.
Screw into the Window first.
18x30mm screws.
Pre drill
hole
30mm
screw
Step 2
Lay the Door Gable
(No. 1)
face up on a
flat surface, place the Door
(No. 7)
within
the door aperture. Position the door
centrally to the door aperture ensuring
any gap is equal on all four sides.
Once you are happy the door is in the
correct position place a Hinge
(No. 23)
at
the top and bottom of the door, ensuring the
screws will go into the framing (in cases
where you have been supplied three
hinges use the third in the middle of the
door) and using 30mm black screws fix
the hinge to the door and the door gable.
14x30mm Black screws
Pre drill
hole
30mm
screw
7
1
