12
P 6
Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
5
Step 7
Parts needed - x2 & x2
Fix an Eaves Frame x2
(No. 9)
to each Roof Sheet x2
(No. 5)
using 5x30mm screws per
eave.
10x30mm screws.
Position the roof sheets
on the building.
Ensure the roof sheet sits flush
with the building at the back. Fix
using 10x40mm
screws per sheet.
20x40mm screws.
30mm
screw
40mm
screw
9
a
b
a
b
9
5
Step 8
Position the building square between the
floor and cladding.
Fix the building to the floor using 50mm
screws as shown in the illustration. Use
3x50mm screws per panel, making sure to
screw into the floor.
12x50mm screws.
50mm
screw
Step 9
Parts needed -
Fit the Fascia Block
(No. 12)
to the
front of the building using
4x30mm screws, ensuring it is
flush with the outside edge of
each roof sheet.
4x30mm screws.
12
30mm
screw
Step 10
Cut the Felt into 2 sheets of
1353mm length and lay
onto the roof as shown in
the diagram ensuring there
is a 50mm overhang around
the sides.
60x Felt tacks
Felt
tacks
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
