It is ESSENTIAL that you apply wood
treatment immediately after the building
has been assembled.
IMPORTANT: Pre-drill before fixing screws.
P 16
Please retain product label and instructions for future reference
41
42
Step 28
Parts needed - No. 41 QTY 2
No. 42 QTY 2
No. 43 QTY 2
Attach the fascias (No’s. 41, 42 &
43) around the building
following the diagram shown.
Ensure to trap the felt between
the fascia and the building.
Secure the fascia into position
using 4x40mm screws, making
sure to fix through the fascia into
the roof purlin, fascia block
and/or log boards.
Once in place, mark the excess
fascia with a pencil and then trim
the fascias to follow the shape of
building as shown in the
illustration.
24x40mm Screws
Pre drill
hole
40mm
screw
43
43
Step 29
Parts needed - No. 44 QTY 8
Arrange the storm braces (No. 44)
around the building (internally).
Place 2x storm braces per side
fixing into place using 2x 70mm
bolts per brace making sure the
washer & nut are tightened from
the outside of the building.
*Ensure the storm braces are
secured at the highest point
possible on each side.
**Storm braces will help your
building expand and contract
properly.
***It is important that each
bolt is tightened using a
washer so as not to damage
the log boards.
16x70mm Bolt Sets
Pre drill
hole
70mm
bolt
43
41
42
44
44
