P 4
Please retain product label and instructions for future reference
Pre-assembly
*Please note:
Each board interlocks at either end in a staggered pattern.
Before securing ensure that the boards are fitted properly in their respective
tongues and grooves.
Step 1
Parts Needed - No. 33 QTY 2
No. 34 QTY 2
Lay the bearers (
No’s. 33 & 34
) onto a
firm and level surface
(
free from areas where standing
water can collect
) as shown in the
illustration.
Fix the bearers together at each
corner screwing 2 screws per corner
using 8x70mm screws,
ensuring the bearer is flush.
Once fully assembled, ensure the
bearers are square by measuring
from corner to corner as illustrated,
making sure the measurements are
equal.
If the bearers are not aligned equally,
unscrew, adjust and re-align
accordingly.
8x70mm Screws
Pre drill
hole
70mm
screw
34
34
33
33
IMPORTANT:
Pre-drill before fixing screws.
34
34
34
34
34
34
34
34
Pre drill
hole
70mm
screw
Step 2
Parts Needed - No. 34 QTY 8
Following the same method,
arrange the remaining bearers
(
No. 34
) inside the assembled
frame.
*Ensure there is an equal amount
of space between each frame.
Secure each of the frames in place
using 2x70mm screws for each side
of the bearer, ensuring the bearers
remain level.
32x70mm Screws
34
33
34
IMPORTANT:
Pre-drill before fixing screws.
Pre drill
hole
70mm
screw
Step 3
Parts needed - No. 33 QTY 2
No. 34 QTY 10
Following the same method
outlined in
Step 1 & 2
, build
the other base section.
*Ensure there is an equal
amount of space between
each frame.
Secure the base sections
together using 9x70mm
screws, ensuring to fix in an
alternating pattern so as not to
collide screws.
49x70mm Screws
33
34
IMPORTANT:
Pre-drill before fixing screws.
For assistance please contact customer care on: 01636 821215
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk