background image

P 6

Please retain product label and instructions for future reference

             

Step 5

Parts Needed -  No. 11 QTY 1

 

 

    No. 12 QTY 1

 

 

    No. 13 QTY 1

 

 

    No. 14 QTY 1

Arrange the left, right, top & bottom door 

frames 

(No’s. 11, 12, 13 & 14) 

onto a level 

surface. Secure the top and bottom frames to 

the uprights using 2x80mm screw per corner, 

ensuring the screws do 

NOT

 protrude through 

the front of the door framing.

8x80mm Screws

Pre drill 

hole

80mm 

screw

13

14

11

12

IMPORTANT : 

Pre-drill before fixing screws.

The lip of the door frame should 

be postioned on the inside of 

the building.

14

12

Step 6

Once you have laid 6 log boards (

off of the starter

up the door section, slide the assembled door 

frame over the boards resting the frame on top of 

the starter board 

(if you have not yet assembled 

the door frame refer to step 5)

*Please note:

 This image is for illustrative purposes 

and may differ from your choice in product 

(

regarding door position

). Nevertheless the 

process of fitting the door frame is the same.

**Please Note: 

The short boards at the front of the 

building (either side of the door and window 

opening’s) can be placed either side depending on 

your needs.

Step 7

Parts Needed - No. 25 QTY 6

                                 No. 26QTY 6

                                 No. 28 QTY 12

                                 No. 29 QTY 12

                                 No. 30 QTY 6

Following the method shown in the illustration, 

lay the next 6 boards (

No. 25, 26, 28, 29 & 30

onto the log cabin to  create your second level.

*Ensure that the boards are level and flush with 

each other as you lay each one. 

25

26

28

30

29

28

29

Содержание 0619PNNE0324HGDD2SW-V1
















Отзывы: