Step 3
Parts Needed - No. 5 QTY 12
No. 8 QTY 6
No. 10 QTY 10
Following the same method
outlined in
Pre-Assembly
, lay
the first 6 boards (
No’s. 5, 8 &
10
) onto the starter boards to
create your first level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
P 5
Please retain product label and instructions for future reference
10
10
8
5
5
10
8
11
6
7
6
7
Step 5
Parts Needed - No. 6 QTY 12
No. 7 QTY 12
No. 8 QTY 6
No. 10 QTY 6
No. 11 QTY 12
Following the same method
outlined in
Pre-Assembly
, lay
the next 6 boards (
No’s. 6, 7,
8, 10 & 11
) onto the assembly
to create your second
level.
*Ensure that the boards are
level and flush with each
other as you lay each one.
*Doors can be hung once the
boarding has enclosed the
door frame by 12-13 boards,
refer to door installation
instructions, if not, you can
install the door at step 7.
Step 4
Once you have laid 6 log boards (
off
of the starter
) up the door section,
slide the assembled door frame
(No.
2)
over the boards resting the frame
on top of the starter board.
Please refer to your window and
door instructions for assembly.
*Please note:
This image is for illustra-
tive purposes and may differ from your
choice in product (
regarding door
position
). Nevertheless the process of
fitting the door frame is the same.
**Please Note:
The short boards at the
front of the building (either side of the
door and window opening’s) can be
placed either side depending on your
needs.
11
