P 8
Please retain product label and instructions for future reference
It is ESSENTIAL that you apply wood treat-
ment immediately after the building has
been assembled.
Step 19
Parts needed - x2
Attach two turn buttons (No. 21) to
the slave door at the top and
bottom of the door using 1x30mm
black screws.
2x30mm black screws
30mm
screw
Sla
ve D
oor
Lock
ing D
oor
Step 17
Parts needed - & x2
Position the press lock
(No. 17) onto the master door.
Ensure it is align with the key
hole and fix into position using
4x10mm screws.
Then fit a barrel bolt
(No. 18) to the top and bottom
of the slave door as shown in
diagram. Use 4x10mm screws
per barrel bolt.
Drill a hole in the framing above
and below the door for the barrel
bolt to fix into.
12x10mm screws
Pre drill
hole
10mm
screw
Step 18
Parts needed - x2
To fix the Chrome handles (No.
19) firstly pre drill hole approxi-
mately 5mm in the middle of the
door framing, then screw the
handle in as shown using
2x35mm bolt from behind the
door. Repeat with other handle.
Please disregard screws supplied
with handles as they are too
short.
4x35mm bolts
35mm bolt
17
19
18
18
17
19
21
A
B
A
B
Pre drill
hole
Pre drill
hole
INSIDE OF BUILDING
21
AFTER TREATMENT:
score around protective
cover on glazing and
carefuly peel
covering back
