Mercia Garden Products 03DTSHPN1006FGD2TW-V1, Общее руководство по инструкции

Страница: 5 / 12

P 5
Please retain product label and instructions for future reference
Step 7
Parts needed - No. 1 QTY 1
Fix the Door Panel
(No. 1)
between the
Twin Window Panel (No. 2) and the Left
Panel
(No. 4)
using 50mm screws in
alternating directions.
*Please note that the Door panel is
shorter than the side panels.*
Fix the panels together with
50mm screws as shown in the
illustration.
Do
not
secure the building
to the floor until the roof
is fitted.
8x50mm Screws
Pre drill
hole
50mm
screw
1
4
2
Step 8
Parts needed - No. 7 QTY 3
- No. 20 QTY 3
50mm
screw
Pre drill
hole
Fix the Eaves framing (No.20) to the
roof
(No.7)
using 4x50mm screws per
eaves framing, screwing through the
eaves framing and into the roof
framing.
Ensure the eaves framing is flush
to the edges of the roof framing
before securing
12x50mm Screws
7
20
7
20
7
20
Step 9
Parts needed - No. 7 QTY 3
Place the Roof Panels (
No. 7
) onto the top
of the building. Align the three Roof Panels
so they sit square before fixing into postion.
The roof eaves frames ( No. 20 ) should sit at
the back of the building.
*The roof panels should sit on top of the
left and right panels, the roof panels
framing should sit on top of the back,
door and twin window panels.*
Do not secure the building to the Floor
until the roof is fitted.
7
7
7
20
Step 10
Fix the three Roof Panels (No. 7)
together using 50mm screws. Offset
the screws from each other as shown
in the diagram.
*Roof boards not shown for
illustration purposes.
Do not secure the building to
the Floor until the roof is
fitted.
16x50mm Screws
Pre drill
hole
50mm
screw
7
7
7