6
90
6
*Playhouse used for illustration purposes only*
6
6
Ground anchors should be
permanently fixed when in use
P 7
Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
Step 9
Parts needed - x2
When staking down the swing arm ensure
that it is positioned correctly (see safe
play advice). The Ground Stake (
No. 6
)
should be approximately 90 degrees to
the leg as shown. Attach 1 stake per leg
with 1x70mm screw each.
Insert the Ground Stake x2 into the
ground using the side of the leg as a
guide.
Make sure the Ground Stakes are as far
into the ground as possible to prevent
tipping.
2x70mm screws.
It is ESSENTIAL that you apply wood treat
-
ment immediately after the building has
been assembled.
AFTER TREATMENT:
score around protective
cover on glazing and
carefuly peel
covering back
1!
2!
Pre drill
hole
50kg
4!
Playhouse Maintenance:
It is recommended that the following checks and maintenance are carried out at the begin-
ning of each season as well as at regular intervals during the usage season.
- Check all nuts /bolts/ screws for tightness and tighten when required.
- Check for movement / opening of wood giving rise to protrusion of nail heads and tips.
- Check hinges.
- Replace defective parts in accordance with the manufacturers instructions.
- Check any crossbeams, suspensions and anchors.
- If a swing is included; check the swing seat, chains and ropes.
IF THESE CHECKS ARE NOT CARRIED OUT THE ACTIVITY TOY COULD BECOME A HAZARD
