Mercia Garden Products 02DTAXVP0701-V1-PEFC, Общее руководство по инструкции

Страница: 8 / 23

1011mm
Step 7
Parts needed -
Locate the Bunk Floor Support Bars
(No. 13) onto the Door Panel (No.
2)
and Back Panel
(No. 3)
at a
height of
1011mm
from the top of
the floor to the underside of the
support bar
(No. 13)
as shown in
the illustration.
Secure in place by screwing
through the support bar (No. 13)
into the upright panel framing
using 60mm screws.
8x60mm screws.
1! 2!
Pre drill
hole
60mm
screw
13
1011mm
13
13
Step 8
Parts needed -
Locate the Bunk Floor Block D
(No. 17)
between the framing of the door panel
at a height of 28mm
from the top of the
Support Bar
(No. 13)
to the underside of
Floor Block D
(No. 17)
as shown in the
illustration.
Fix in place by screwing through the
framing of the door panel into each end
of the block using 2x40mm screws.
2x40mm screws
1! 2!
Pre drill
hole
17
13
40mm
screw
28mm
17
1! 2!
Pre drill
hole
40mm
screw
Step 9
Parts needed - &
Locate one Bunk Floor Block E
(No. 18)
flush to the panel framing. Ensure the top
of block E is 28mm from the top of the
support bar
(No. 13)
. The longest side of
the block should be against the panel
framing.
Fix to the Door Panel using 1x40mm
screw through the block into the framing.
Locate Bunk Floor Block D
(No. 17)
on top
of Block E as shown in the diagram.
Fix with 1x40mm screw through the
panel framing into the left end of the
block and 1x40mm screw down through
block D
(No. 17)
into block E
(No. 18).
3x40mm screws
18 17
18
17
28mm
13
www.merciagardenproducts.co.uk P8
Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.