7
30mm
screw
Pre drill
hole
50mm
screw
Pre drill
hole
Felt
tacks
HANDLE
WITH CARE
1
2
3
4
40mm
screw
Pre drill
hole
7
P 5
Please retain product label and instructions for future reference
Step 9
Place the roof panels on top of
the building ensuring they sit
into the cut outs on the gables
and truss.
*Make sure there is an equal
amount of overhang on either
side of the building.
Secure into position using
13x30mm screws per roof section,
screwing through the boards into
the gable and truss framing.
52 x30mm Screws
Step 10
Once the roof is fixed secure
the building to the floor with
36x50mm screws.
56x50mm Screws
b
Step 11
Cut the felt into four strips lay onto
the roof as shown in the illustration.
*Ensure there is approximately 50mm
of overhanging felt each side.
Once the felt is laid out fix to the
roof using felt tacks at 100mm
intervals.
*Felt size: 6190mm
316x Felt Tacks
Step 12
Fit the cover trims to the building
and secure in place with 38x40mm
screws as shown in the illustration.
38x40mm Screws
7
7
b
b
b
b
b
b
b
1
2
3
4
12
12
12
12
12
12
11
11
12
12
12
12
