70mm
screw
100mm
screw
Pre drill
hole
30mm
screw
Pre drill
hole
P 4
Please retain product label and instructions for future reference
Step 8
Locate the truss centrally in
the building. Align the top of
the truss with the top of the
gables.
*Use a piece from the fixing
kit as a guide.
Pencil mark the position and
remove the truss.
Place the truss blocks up to
the pencil mark and fix
using 2x70mm screws per
block.
Rest the truss on top of the
blocks and secure into place
using 1x100mm screw per
side as shown in the
illustration.
4x70mm Screws
2x100mm Screws
Step 6
Place the master and slave door into
the door panel and fix into place with
3x T-hinges per door and 7x30mm
screws per hinge.
*Ensure to screw through the boards
into the framing on the back of each
door.
42x30mm Screws
30mm
screw
Pre drill
hole
Step 7
A.
To construct the truss, secure
the Truss supports together as
shown with 2x30mm screws.
B.
Secure the Truss Bars to both
sides of the Truss support making
sure to stagger the 4x40mm
screws.
C.
Finally secure the Truss point
to both sides with 3x30mm
screws.
10x30mm Screws
8x40mm Screws
A.
B.
C.
40mm
screw
For assistance please contact customer care on: 01636 880514
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk
18
9
8
16