Felt
tacks
HANDLE
WITH CARE
1
2
3
4
40mm
screw
Pre drill
hole
Pre drill
hole
Pre drill
hole
*Cut down trims to fit
P 5
Please retain product label and instructions for future reference
Step 10
Cut the felt into four strips lay onto
the roof as shown in the illustration.
*Ensure there is approximately 50mm
of overhanging felt each side.
Once the felt is laid out fix to the
roof using felt tacks at 100mm
intervals.
*Felt size: 3210mm
170x Felt Tacks
Step 11
Fit the cover trims to the building
and secure in place with 26x40mm
screws as shown in the illustration.
26x40mm Screws
Step 12
Place the cover strip 13mm above
the gap in the window panel and
fix into place using 3x30mm screws.
*Measure and trim the strip before
fitting.
3x30mm Screws
If you would like the widows
to open attach the window to
the strip using 2x butt hinges.
Fix the hinges to the window
using 3x16mm screws per
hinge and to the strip with
3x30mm screws.
6x16mm Screws
6x30mm Screws
If you would like the window
to be fixed, secure the window
into the gap using 4x30mm
screws. Ensure to screw through
the window into the panel
framing.
4x30mm Screws
b
a
1
2
3
4
12
13
13
13
13
13
13
10
Opening Window
Fixed Window
30mm
screw
30mm
screw
16mm
screw
30mm
screw
20
13
Pre drill
hole
a
b
