Mercia Garden Products 01OVLPA10DDGP-V1, Общее руководство по инструкции

Страница: 14 / 17

P 14
30mm
screw Pre drill
hole
32
32
Step 25 (Fixed Window only)
Parts Needed - No. 29 QTY 1
Using a pencil and a straight edge, measure
the Strip (No. 32) to create two 546mm
length strips per window panel.
Cut along the marked lines to make 2
window strips, each measuring 546mm in
length.
*Please note you have excess strip left over,
keep this to one side as you will require this
in future steps.
Fix 2 window strips to the framing that
sits either side of the window, using
3x30mm screws per trim, as shown in the
illustration.
Repeat this for both Window Panels.
6 x 30mm Screws
IMPORTANT : Pre-drill before fixing screws.
*
trim to fit
34
SILICONE
SEALANT
Place the plastic window cill
(No.34)
onto the Window Panel and use a silicone
sealant to secure in place, as shown in the
illustration.
*please note silicone sealant is not supplied
with your building*
Fit the styrene sheets (No.33) on top
of the window cill
(No.34)
.
When positioning the styrene sheets
ensure there is an equal distance
between them and either side of the
windows.
Repeat for both Window Panels.
a
b
33
a
b
33
Step 26 (Fixed Window only)
Parts Needed Per Window Side - No. 32 QTY 2
No. 34 QTY 4
Styrene
Window Cill
Cladding
Side View
Please retain product label and instructions for future reference